Contributing Member JLSleather Posted May 17, 2018 Contributing Member Report Posted May 17, 2018 On 5/15/2018 at 11:10 AM, JLSleather said: Know what AINT right here → or even right here ↓ ?@! PICS of all the fancy smancy stuff yer stitchin' with the new toys ... Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Members Clintock Posted May 18, 2018 Author Members Report Posted May 18, 2018 On 5/15/2018 at 7:38 PM, Clintock said: You might not wanna see those at the moment... still just tinkering with it on scraps. But rest assured it will be used. Hand stitching is for the birds! getting there. Maybe one day. Quote
Members rpicker03 Posted May 19, 2018 Members Report Posted May 19, 2018 (edited) Looking for help.. which i found this topic trying to find the help i need. Not sure it’s the same thing though. I have a bad bearing in the part that holds the rod for the flywheel between the motor and the sewing machine. Number 6205rs. I have new bearings but can anyone help me figure out how to remove them? There are two of them one on each end of the cylinder. Edited May 19, 2018 by rpicker03 Quote
Moderator Wizcrafts Posted May 19, 2018 Moderator Report Posted May 19, 2018 14 minutes ago, rpicker03 said: Looking for help.. which i found this topic trying to find the help i need. Not sure it’s the same thing though. I have a bad bearing in the part that holds the rod for the flywheel between the motor and the sewing machine. Number 6205rs. I have new bearings but can anyone help me figure out how to remove them? There are two of them one on each end of the cylinder. The flywheel usually refers to the huge hand wheel on the right end of the machine. Is this what you are asking about, or is it the speed reducer under the table that has a bad bearing? Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.