Members ltoddv Posted July 5, 2018 Members Report Posted July 5, 2018 Hey! So I just got a new ranger buckle set that has an off set or dog leg in the buckle. My question is, is this installed the same as any other ranger belt or does it have to be done differently? I apologize for no pictures right now but best I can describe is the off set is the bar the buckle prong goes around is off set below the buckle. It is a 1/2” buckle set. Thanks in advance for any help!!! Quote
alpha2 Posted July 5, 2018 Report Posted July 5, 2018 What you describe sounds like a typical buckle that is designed so that the billet doesn't have to make a big curve over that bar. Moving the prong bar down allows the billet to lay flatter. Jeff Quote So much leather...so little time.
Members ltoddv Posted July 5, 2018 Author Members Report Posted July 5, 2018 Thanks for the info! That makes sense I just wanted to make sure it was installed the same before I messed it up. Thanks for the help! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.