Jump to content

Recommended Posts

Hi

Does anyone have experience with a Fenda Splitter.  German made unit similar to the Landis 30 but with a hand crank on top to adjust the thickness.

Thank you in advance

Silverd

00g0g_edbaTy6xv7E_1200x900.jpg

Share this post


Link to post
Share on other sites
On 23.7.2018 at 9:21 PM, Silverd said:

Hi

Does anyone have experience with a Fenda Splitter.  German made unit similar to the Landis 30 but with a hand crank on top to adjust the thickness.

Thank you in advance

Silverd

00g0g_edbaTy6xv7E_1200x900.jpg

Hi silverd,

This is a Fenda, made by German company Rafflenbeul. Simple and almost indestructible, spare blades are still available here in Germany. But it seems the cover of the lower part is missing (compare with photo below).

I found a "Rudo" which is Fenda's big brother, but haven't received it yet (so no experience yet). How much did you pay if I may ask? Even a used one in good condition is bloody expensive here...

IMG_20180827_145233.png

IMG_20180827_145332.png

Share this post


Link to post
Share on other sites

I picked up a very clean completely  refurbished by Pilgrim Co. Landis 30 6" machine for $900.00 USD.  loops to be in perfect condition and works perfectly as well.

.

Share this post


Link to post
Share on other sites

Hello, I just purchased a Fenda 6" for the equivalent to ~140 USD! It does need some maintenance and the casting broke and was repaired at some point in the past, but it looks solid. Does anyone have documentation on this machine? Joerg mentioned the blades are still sold in Germany, could you point me in the right direction? thank you, best wishes

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...