durkopp adler 291

[59morris]

Hi....I just bought an Durkopp Adler 291 and never checked for a bobbin holder, my mistake. The machine is in perfect shape with no visible wear on the important parts. The motor runs like a champ and when I apply air everything works, the only thing I need to start sewing is a bobbin case. Any help would be well received even if they are used. Thanks in advance......Bob

[Constabulary]

On 24.8.2018 at 1:46 AM, 59morris said:

Hi....I just bought an Durkopp Adler 291 and never checked for a bobbin holder, my mistake. The machine is in perfect shape with no visible wear on the important parts. The motor runs like a champ and when I apply air everything works, the only thing I need to start sewing is a bobbin case. Any help would be well received even if they are used. Thanks in advance......Bob

College Sewing in the UK has them as well as other bits:

https://www.college-sewing.co.uk/store/Durkopp-Adler-291,-292-Sewing-Machine-Parts

[59morris]

hi  

Constabulary ....thanks for the heads up. I have checked them out and I did see a "bobbin cap", I since have found a parts list but it shows a bobbin case and I'm not sure which one I need for my machine now. I went back to where I bought my 291 and all the remaining machines are also missing that part. The seller is only an employee and has no inside information about them. I am leaning towards the cap in the College parts list though.

I guess it won't hurt to order the cap and hand operate the machine through a cycle to make sure nothing is going to bind or break before turning on the power.

thanks again.....Bob

[59morris]

Hello again.  I did some more research as some members suggested and found a picture of my machine with the bobbin cap in place. I was able to blow it up and read the part numbers. They are   0295  001426  . Today I will call College Sewing and order it along with some bobbins. thanks again for all the help      Bob