Edge Roller Guide for Consew 206RB-5

[keithdubya]

I purchased an edge roller guide on Ebay for a Consew 206RB-5.  It has a stamp on it that says GB-6.  It does not fit as described.  Has anyone used this roller Guide with a Consew 206RB-5?  Is there an attachment that I can use to make it work or does anyone have a recommendation of a better roller guide to use with the Consew 206RB-5?

Keithdubya

 

Edited August 26, 2018 by keithdubya

[Joon1911]

I’m sure someone will be able to tell you exactly which mounting plate you need to use on the 206RB, but I use a similar roller guide on my Class IV and used the Kwok Hing KB205 mounting plate to mount to the back of the machine.  http://www.khsew.com/index.php?route=product/product&product_id=338&search=Kb205

[Uwe]

I think you actually need the KB-267 adapter bracket (i still have some in stock) to install a KG series edge guide on your Consew 206RB5. The adapter provides just enough of an offset to clear the casting on the machine. Various swing-down edge guides have the same mounting hole arrangement and the adapters allow them to fit a large number of machines.

Here's a picture of the KB-267 adapter:

 

 

[keithdubya]

Thank you Uwe.  I am placing the order now.  I figured It would be easier to try to find the adapter before making one myself.

Keithdubya

[Teslabolt]

On 8/26/2018 at 8:28 PM, Uwe said:

I think you actually need the KB-267 adapter bracket (i still have some in stock) to install a KG series edge guide on your Consew 206RB5. The adapter provides just enough of an offset to clear the casting on the machine. Various swing-down edge guides have the same mounting hole arrangement and the adapters allow them to fit a large number of machines.

Here's a picture of the KB-267 adapter:

 

 

Anymore left? :D

[Uwe]

Sorry, I have none left.

A few sellers on Ebay have them, just search for "KB267", order and then be patient for free shipping from China.