Members Darren Brosowski Posted September 23, 2018 Members Report Posted September 23, 2018 Look at the clearance between the needle and hook, making sure you push the hook away from the needle. The shuttle can wear the spacer ring behind it and allow too much clearance so try cutting a thin cardboard ring to sit behind the spacer. I have seen this fix dozens of times on old 45k25's Quote
Members DavidMillsSaddlery Posted January 22, 2021 Members Report Posted January 22, 2021 On 9/13/2018 at 10:13 AM, BaroqueLeatherGal said: . I use 138 thread in the bobbin and 207 on the top, using a size #25 DYX3 LR needles of high quality. There’s your problem! Way too much needle for that thread! Quote
Moderator Wizcrafts Posted January 22, 2021 Moderator Report Posted January 22, 2021 1 hour ago, turbotexas said: There’s your problem! Way too much needle for that thread! I hope he figured that out 2 1/3 years ago when this topic was last active. ;-) Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Members DavidMillsSaddlery Posted January 27, 2021 Members Report Posted January 27, 2021 On 1/21/2021 at 10:48 PM, Wizcrafts said: I hope he figured that out 2 1/3 years ago when this topic was last active. ;-) Someone may be having the same problem... hahaha Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.