koreric75 Report post Posted October 28, 2018 So, I'm working on another messenger bag, this one has two front pockets that are about an inch deep. Instead of using a gusset i borrowed a design from a tandy book and made a printable/cutable template....i used a stoned oil side on my cricut to cut this out, but laser or print, trace and cut should work. The dimensions can be adjusted in inkscape for wider, taller, and deeper pockets...just remember to keep the distance inside the "gouge lines" even. The .svg file is below and the direct link is on pinterest to the cricut project. https://pin.it/nkkrzks5tuuhoc bag-front pocket.svg Quote Share this post Link to post Share on other sites
bikermutt07 Report post Posted October 28, 2018 Nice. Quote Share this post Link to post Share on other sites
koreric75 Report post Posted October 31, 2018 On 10/27/2018 at 11:03 PM, bikermutt07 said: Nice. Thanks matt, here's the final bag with the pockets.... Quote Share this post Link to post Share on other sites
bikermutt07 Report post Posted October 31, 2018 Fancy shmancy Quote Share this post Link to post Share on other sites
