6"x8" pocket template

[koreric75]

So, I'm working on another messenger bag, this one has two front pockets that are about an inch deep.  Instead of using a gusset i borrowed a design from a tandy book and made a printable/cutable template....i used a stoned  oil side on my cricut to cut this out, but laser or print, trace and cut should work.  The dimensions can be adjusted in inkscape for wider, taller, and deeper pockets...just remember to keep the distance inside the "gouge lines" even.  The .svg file is below and the direct link is on pinterest to the cricut project.

https://pin.it/nkkrzks5tuuhoc

 

 

bag-front pocket.svg

[bikermutt07]

Nice.

[koreric75]

On 10/27/2018 at 11:03 PM, bikermutt07 said:

Nice.

Thanks matt, here's the final bag with the pockets....

 

[bikermutt07]

Fancy shmancy