Guest AT dog runner Posted November 8, 2018 Report Posted November 8, 2018 Two summers from now, my pups will be at the right age in their prime. I just bred 4 males from a my amazing male puller. I plan to run the Appalachian trail rotating out dogs pulling me on a mountain board. I use store bought harnesses currently for training my mature dogs, they bust up within a month or so with casual use, they are big dogs around 80-100 lbs each. I would like to commission a custom harness for each dog that will last up to the wear and tear of 3000 plus miles. This might require fitting and measuring so i dont know how we would go about that over the internet. If anyone is interested in taking this project on, i have over a year to complete my prep including finding suitable harnesses. OR if anyone has information on quality dog harnesses that would be great. I would also like to be able to mount small lights or go pro cams to these harnesses. Quote
Members Big Sioux Saddlery Posted November 8, 2018 Members Report Posted November 8, 2018 What is your location? Quote
Moderator Wizcrafts Posted November 9, 2018 Moderator Report Posted November 9, 2018 19 hours ago, Big Sioux Saddlery said: What is your location? According to the IP address, the OP is in Chester, Virginia. Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Members Sheilajeanne Posted November 10, 2018 Members Report Posted November 10, 2018 What are the store bought harnesses that bust up within a month or so? There are many different harness designs. The one most frequently used for pulling is the x-back harness: https://www.mondou.com/en-CA/p-x-back-classic-dog-harness-for-towed-sports/1019908-MASTER?gclid=CjwKCAiA_ZTfBRBjEiwAN6YG4V0otGz_Pp_se_hsdYhNWijQdvjhGbYHtLsJT2FY4TQ16hF4BRLGoBoCKJoQAvD_BwE But there are other kinds too: https://grossenbacher-beat.ch/en/dogs/product/dog-sledding-harness https://homesecurity.press/quotes/dog-weight-pulling-harness.html https://www.all-about-cane-corso-dog-breed.com/leather-dog-harness-c-4_28/trackingpullingagitation-leather-dog-harness-for-cane-corso-breed-p-1.html Of course, the harnesses shown in nylon can also be made in leather. I really don't get how these harnesses are falling apart after just a month. I've used a nylon harness for tracking for many years, along with a 30 ft. nylon horse's lunge line, and both are still in perfect shape. I also use the harness for protection, and the dog pulls against it very strongly. It's held up very well. Leather harnesses should last for many years too, if they are made of good leather to start with. I've seen horse tack that was 30 years old, but still in excellent condition. Leather harnesses do require routine maintenance to keep them in good shape. They need to be cleaned with saddle soap, and sometimes oiled with neatsfoot oil when the leather starts to dry out. They should never be exposed to excessive heat. And to stand up to the wear and tear of pulling, they need to be made of good quality leather, either latigo or bridle leather, which has been treated with waxes and oils to make it resistant to water and sweat. I've lived in northern Ontario, and attended a number of sled dog races. The mushers as a rule use nylon harnesses because they are cheaper than leather, and don't need maintenance other than occasional cleaning. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.