Jump to content

Recommended Posts

  • Members
Posted
1 hour ago, KennethM said:

To update everyone techsew graciously sent me a speed reducer with belts free of charge.

 

Now I am trying to figure out why my middle pressure foot doesn't walk properly.Here's a vid explaining what I mean

 

https://www.dropbox.com/s/619lpq7g6twey11/1112180945.mp4?dl=0

Your inner and outer foot lift are out of sync with each other. 

 

Watch Uwe's vid from this point here:

https://youtu.be/iiaaT1npYrQ?t=193

It's a different machine but the adjustment is very similar. Your foot height is fine, you just need to loosen and reset the foot lift crank screw. You want the outer and inner foot to have roughly equal lift. See page 50 of the Sailrite guidebook I linked to, it will show you which screws (marked "B") to loosen. 

 

  • Members
Posted

Have to ask... why isn't Techsew walking you through this?

  • Members
Posted

I emailed them the vid this morning like they requested bur haven't heard anythinf back..thank you for the help brother.

Posted
24 minutes ago, R8R said:

Have to ask... why isn't Techsew walking you through this?

We are..

4 minutes ago, KennethM said:

I emailed them the vid this morning like they requested bur haven't heard anythinf back..thank you for the help brother.

Hi Kenneth, we have a technician looking into it, please check your email.

thanks,
Ron

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...