Roller guide for a Consew 1206RB

[lb61906]

Hey Everyone, 

Does anyone with a Consew 1206RB have a roller guide installed?   If so, could you point me in the direction of the right model?

Thanks, 

CJ

[shoepatcher]

standard flip down roller guide sold on line or by our dealers here should fit this machine.  You may have to drill and tap holes in the back of the casting.

glenn

[lb61906]

I talked to Bob at Toledo about a flip-down guide for this machine and he said he didn't know of one made that would fit the 1206rb.    

Just curious if any other 1206rb owners have found a roller guide that works well.

thanks

[Gregg From Keystone Sewing]

10 hours ago, lb61906 said:

I talked to Bob at Toledo about a flip-down guide for this machine and he said he didn't know of one made that would fit the 1206rb.    

Just curious if any other 1206rb owners have found a roller guide that works well.

thanks

If you can drill and tap some M6X1 or 1/4-20 holes into cast iron, how many do you want?  I don't have this model on hand, can you take a picture of where it would mount nearby, next the the hand lever for presser foot lifter?