Members Sturmtrupp702 Posted February 11, 2019 Members Report Posted February 11, 2019 I just bought an antique C.S. Osborne draw gauge that needs a new blade. Will the blade for the new 5 1/2" draw guage fit? Its #51-1/2B Quote
Members billybopp Posted February 11, 2019 Members Report Posted February 11, 2019 Blades for these metal draw gauges are pretty much universal, and fairly inexpensive at about $10 from C.S. Osborne. I have a Civil War era Sauerbier draw gauge, and bought a CSO replacement that fits perfectly. It will need some sharpening, and I suggest rounding off the end of the blade a bit for safety. Alternatively, Terry Kinpschield offers a blade for $45 that will arrive razor sharp. - Bill Quote
Members AlamoJoe2002 Posted May 30, 2021 Members Report Posted May 30, 2021 I purchashed an original Osborne blade. It is too thick. Then I purchashed the same blade tuned up by Bruce Johnson. A world of difference. Rounded off tip for safety, thinned down and beveled correctly which produces a nice cut. However, I guess I should have known better than teaching myself how to use a draw blade on a side of 12-14 ounce skirting. Lessons Learned. Go big or go home...and always keep on learning. Fixing my mistakes is quite an educational experience. Joe Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.