Members snabbaville Posted February 21, 2019 Members Report Posted February 21, 2019 I'm thinking to change my clutchmotor to a servo motor.......is this a servomotor for my machine? JK-563A-1 220V 750W 1 HP SERVO MOTOR WITH NEEDLE POSITION Quote
Members dikman Posted February 21, 2019 Members Report Posted February 21, 2019 Should fit, modern servos use the common 3-bolt mounting used by clutch motors. Do you want a needle positioner? If not try and find one without it, should be cheaper. Quote Machines wot I have - Singer 51W59; Singer 331K4; Seiko STH-8BLD; Pfaff 335; CB4500. Chinese shoe patcher; Singer 201K (old hand crank)
Members snabbaville Posted February 22, 2019 Author Members Report Posted February 22, 2019 What is needle positioner ? must i have that Quote
Members shoepatcher Posted February 22, 2019 Members Report Posted February 22, 2019 It allows you to have a needle up or needle down setting meaning when the stitch finishes, the needle is either left in the work or comes up out of the work. glenn Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.