Surrylda Report post Posted March 17, 2019 Hi there! I'm hoping to install this swing down edge guide: Sewing Machine Suspended Hanging Edge Guide Ruler for Industrial GB-6 Model (US Stock) https://www.amazon.com/dp/B07CHDR7NB/ref=cm_sw_r_cp_apa_i_HKzJCbJEZVTZ4 I'd also purchased this adapter for the install: KUNPENG -1set #KB-205 Adapter Bracket for Durkopp Adler 205-370, 204-370, Cobra 4 https://www.amazon.com/dp/B078HBGZ82/ref=cm_sw_r_cp_apa_i_aMzJCb96709BJ I watched Uwe's videos on both the Adler 205 install and the Cowboy 4500, but I'm not seeing where I can safely drill into my specific machine. I do see where another user said they've done it but the pictures are too dark to see where they drilled. I'm hoping someone on here can help guide as I'm hesitant to drill into the wrong area & wreck my machine. Thanks all! Quote Share this post Link to post Share on other sites
Surrylda Report post Posted March 22, 2019 No input or experiences? Quote Share this post Link to post Share on other sites
CowboyBob Report post Posted March 22, 2019 Yes,your right there isn't enough metal there to be able to drill the holes you need to mount it. Quote Share this post Link to post Share on other sites
tofu Report post Posted March 22, 2019 When all else fails, there's jbweld to the rescue Quote Share this post Link to post Share on other sites
Surrylda Report post Posted March 23, 2019 1 hour ago, tofu said: When all else fails, there's jbweld to the rescue I hadn't thought of that. Maybe I'll retrofit it! 3 hours ago, CowboyBob said: Yes,your right there isn't enough metal there to be able to drill the holes you need to mount it. I was afraid of that. Thank you for the feedback. Quote Share this post Link to post Share on other sites
