McBeal Report post Posted April 11, 2019 First time owning a industrial machine. I will be using a nylon binding tape on canvas and I'm trying to find a double fold binder attachment that will fit the 562. I'm aware of Tennessee Attachment but this is a hobby. Any suggestions? Quote Share this post Link to post Share on other sites
kgg Report post Posted April 11, 2019 My suggestion is to purchase binding tape already double folded and use a single fold binding attachment. I have tried the off the shelf double fold binders and found that the amount of clearance (top fold to bottom fold) at the needle side is really tight. I had better results with using a single fold binding attachment but feed double fold ripstop tape into it to get a nice double fold rather then a raw edge fold. If you are going too make your own double fold bias tape, purchase a Bias Tape binding maker in the size you need then just feed it into the single fold binder. The only thing I had to do was open the ends up very slightly. kgg Quote Share this post Link to post Share on other sites
McBeal Report post Posted April 11, 2019 Thank you so much! I shall try that. Now to find the attachment that fits Juki 562. Quote Share this post Link to post Share on other sites
Northmount Report post Posted April 11, 2019 @McBeal Moved your post to Leather Sewing Machines (even though you are using canvas). You'll get more input here. Tom Quote Share this post Link to post Share on other sites
