2 singers

[ljk]

Once a year I have had a regular order requiring a 1/4" double needle.  The rest of the time just

a single needle.  I set this up so I could use either machine.  A spacer plate was used for the the single needle.

I also needed precise speed control, so I add reduction on top which would fit both machines, also I

could handwheel if needed.  Also the regular belt would go to the clutch motor If I needed more speed.

The double needle also has a 1/2 gauge set. This machine also has the needle lift bar for corners.

Both machines and table  $500.  Would exchange single needle with a excellent 111w155 for total

of $650. Going to Colo. end of May, would consider dropping off on the way.  tx Lynn