nycnycdesign Report post Posted April 25, 2019 I think alot of us are in the same boat in this respect. No space or $$ for a full on line finisher but maybe able to afford a good bench buffing motor. The problem is that most landis/sutton brushes have a 1 5/16" bore so it wont fit on a 3/4" arbor. They also dont seem to make horsehair buffing wheels in any smaller diameters (like 3/4") Does anyone have any ideas as far as a suitable adapter? Fitting a 1 5/16" brush on a 3/4" arbor? Machine shops are quoting 300-400 for a milled adapter but that seems way over priced. Wheel http://www.shoesystemsplus.com/Horse-Hair-Brush-for-Sutton-Supreme-Landis-Auto-Soler_p_272.html Buffer https://www.eastwood.com/eastwood-1-hp-buff-motor-dual-speed.html Quote Share this post Link to post Share on other sites
nycnycdesign Report post Posted May 21, 2019 In case future leatherworkers have a similar question. Campbell Randall sells bushing adapters that will let you do exactly this Quote Share this post Link to post Share on other sites
OldNSlowMarine Report post Posted May 16, 2021 I would very much like to discuss your setup because I have been wanting to set up my own buffer. I browsed through Campbell's website and couldn't find an adapter. Any help would be appreciated. Quote Share this post Link to post Share on other sites
pogue44 Report post Posted May 30, 2021 Grizzley tools sell some arbor adapters but not sure what size. Quote Share this post Link to post Share on other sites
