Carnivore Report post Posted April 28, 2019 Here is a deer skull wallet I recently finished. It matched the change purse I made earlier. Outer shell is 4-5oz veg-tan and the inner parts are 2-3 oz veg-tan. Dye is Tandy Eco-Flo medium brown applied with an air brush. Hand stitched with Tandy waxed nylon thread. Quote Share this post Link to post Share on other sites
garypl Report post Posted April 29, 2019 Nice job! Stitching is nice and even from the edges. Did you trim the edges after you stitched? Gary Quote Share this post Link to post Share on other sites
Carnivore Report post Posted April 29, 2019 10 minutes ago, garypl said: Nice job! Stitching is nice and even from the edges. Did you trim the edges after you stitched? Gary Thanks, I did not trim after stitching but I made sure the edges were even and square before I marked out the stitches and tried to make sure my stitching chisels did not wander. Due to the total thickness of approx 1/4" I punched the outer shell first, then glued together and and punched the inner layers using the outer shell as a guide. Quote Share this post Link to post Share on other sites
garypl Report post Posted April 29, 2019 Congratulations - you did a good job! Quote Share this post Link to post Share on other sites
