Moderator Wizcrafts Posted May 17, 2019 Moderator Report Posted May 17, 2019 Okay. My Singer 168 bed size is 7" x 20 3/8". My shorty table is 33 1/2" x 20". It has a floor pedal to lift the feet, connecting to the lift lever via a chain. Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Members DSloop Posted May 17, 2019 Members Report Posted May 17, 2019 I have two tables that 111w155 machines came from. i am in North Carolina. Quote
Moderator Wizcrafts Posted May 17, 2019 Moderator Report Posted May 17, 2019 12 hours ago, DSloop said: I have two tables that 111w155 machines came from. i am in North Carolina. The 111 cutout is too short. You'll need to route out the left side to 20 3/8+ inches (trim to fit) and move the rubber shock mounts. Also, the pivots probable won't match the ones in the table. You may need to buy matching mounts to go from the table to the machine, based on the holes in the machine's bed. Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Members DSloop Posted May 18, 2019 Members Report Posted May 18, 2019 I thought he might be able to use one if he was close by. Quote
Members pgb123 Posted May 18, 2019 Author Members Report Posted May 18, 2019 Thanks DSloop. I’m in NYC. I appreciate the offer though. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.