Lobo Posted May 30, 2019 Report Posted May 30, 2019 Here is a thought for you: try calling Cobra Steve and the gang at Leather Machine Company. Couple of times I ran into a glitch with my Cobra Class 4 there was always someone happy to walk me through it to a happy solution. Quote Lobo Gun Leather serious equipment for serious business, since 1972 www.lobogunleather.com
Members jimi Posted May 30, 2019 Members Report Posted May 30, 2019 I would loosen the front 2 screws of the race ring very slightly to see if this stops the thread from jamming. Quote
Contributing Member JLSleather Posted June 2, 2019 Contributing Member Report Posted June 2, 2019 On 5/29/2019 at 6:10 PM, Hildebrand said: Another thought. Check the tension disc on the bobbin. If you have it tightened down, you should feel pressure on teh thread just pulling it with your fingers, without even putting it in the machine. If you don't, or if tightening it doesn't make the tension greater, then you may have "sprung" the tension spring (on the bobbin assembly). Simple fix -- Bob (link below) able to cure that for me quickly. Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.