Members paloma Posted July 31, 2019 Members Report Posted July 31, 2019 (edited) 13 hours ago, Leatherbag said: Ok, so I'll try it with my supermarket French, so at least one of us can stay with its mother's language: Ce que je voudrai savoir c'est si tu peux me dire que la griffe et l'aiguille se bougent si tu met la manette de réglage de point à 0. Ici ma machine https://vimeo.com/333766977 et tu peux voir que la griffe et l'aiguille se bougent. Mais le réglage correct c'est qu'ils ne bougent pas. Je ne sais pas si ce bougement est normal ou si autre machines ne bougent pas du tout Aaaah yes, okay i understand now,i just make a test right now and it s not move as you describe.I change my stitching size set ,as your, on 0 and the needle up & down,but the horizontal claw mooves very very very slightly it's barely noticeable.if you have the the nose on it. https://vimeo.com/351135389 Sorry for my bad answers before. Edited July 31, 2019 by paloma Quote time does not respect what is done without it https://tradisign.blogspot.com https://www.instagram.com/tradisign/
Members Leatherbag Posted July 31, 2019 Author Members Report Posted July 31, 2019 (edited) Ok, great, thank you so much for the video, that helped a lot!! I am not home now, will compare it later with mine (when I took the video I just turned the handwheel, will do a test with the motor too) but I think they move pretty similar. Now I've got a second question: If you set the stitch length to MAX, does your stitch length lever (the black thing you also pull to do backwards stitched) move? Because mine moves and I am pretty sure that this is not normal..https://vimeo.com/351023059 Edited July 31, 2019 by Leatherbag Quote
Members paloma Posted July 31, 2019 Members Report Posted July 31, 2019 (edited) once I have placed the lever to the right, the black stitch length selector no longer moves Edited July 31, 2019 by paloma Quote time does not respect what is done without it https://tradisign.blogspot.com https://www.instagram.com/tradisign/
Members Leatherbag Posted July 31, 2019 Author Members Report Posted July 31, 2019 (edited) Ok thank you. Just to be sure because on your photo the stitch length is still 0 - what is when you set it to the maximum stitch length (move the stitch length selector as far down as possible) and then sew - does the selector move? Mine is moving slightly up and down, you can also feel it when you put a finger on it while sewing. Here is a picture to see what I mean. Edited July 31, 2019 by Leatherbag Quote
Members paloma Posted July 31, 2019 Members Report Posted July 31, 2019 (edited) 5 hours ago, paloma said: once I have placed the lever to the right, the black stitch length selector no longer moves in any case.down/up/middle/it not moves ( the horizontal black handle-selector) Edited July 31, 2019 by paloma Quote time does not respect what is done without it https://tradisign.blogspot.com https://www.instagram.com/tradisign/
Members Leatherbag Posted July 31, 2019 Author Members Report Posted July 31, 2019 Ok thank you. So I'll have to find a reason why mine moves. Anyone any ideas? I noticed that the needle / feed dog synchro is not good, please find a video here: https://vimeo.com/351201096 Could these problems be connected to each other? What should I do now? Many thanks in adnvance! Quote
Members paloma Posted July 31, 2019 Members Report Posted July 31, 2019 avec plaisir, et heureux d'avoir pu t'aider! Quote time does not respect what is done without it https://tradisign.blogspot.com https://www.instagram.com/tradisign/
Members Leatherbag Posted August 1, 2019 Author Members Report Posted August 1, 2019 (edited) 18 hours ago, paloma said: avec plaisir, et heureux d'avoir pu t'aider! Merci beaucoup Puis-je vous demander quelque chose d'autre? Si tu places le sélecteur au maximum (tout en bas), peux-tu me montrer une vidéo de la manière dont le transporteur et les pieds se bougent? Comme je l'ai fait dans cette vidéo https://vimeo.com/351373018? Ce serait une grande aide. Merci beaucoup d'avance Edited August 1, 2019 by Leatherbag Quote
Members paloma Posted August 1, 2019 Members Report Posted August 1, 2019 (edited) 2 hours ago, Leatherbag said: Merci beaucoup Puis-je vous demander quelque chose d'autre? Si tu places le sélecteur au maximum (tout en bas), peux-tu me montrer une vidéo de la manière dont le transporteur et les pieds se bougent? Comme je l'ai fait dans cette vidéo https://vimeo.com/351373018? Ce serait une grande aide. Merci beaucoup d'avance https://vimeo.com/351392150 Edited August 1, 2019 by paloma Quote time does not respect what is done without it https://tradisign.blogspot.com https://www.instagram.com/tradisign/
Members Leatherbag Posted August 1, 2019 Author Members Report Posted August 1, 2019 (edited) Parfait, merciiiiiii beaucoup!!! Edited August 1, 2019 by Leatherbag Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.