LeatherLegion Report post Posted August 17, 2019 How hard would be to replace one of those take-up arms and where would i find one ? I tried to move the machine and i dropped it. The thread tension unit needs to be replaced too but i just bought one on ebay. Any help will be appreciate it Thank you ! Ed Quote Share this post Link to post Share on other sites
mikesc Report post Posted August 17, 2019 (edited) Take up lever on that machine Juki 341 Part is #B1905241H00 There is one for sale on Ebay in California for $40.00 https://www.ebay.com/itm/Juki-B1905241H00-Thread-Take-Up-Lever-/202649256096 HTH :) Parts list ( pdf ) is here https://www.universalsewing.com/tek9.asp?pg=parts_juki You are looking for Model LS-341N or 341N-7 The parts list exploded diagrams should give you an idea of if you feel up to replacing the part yourself..My advice when disassembling and repairing anything..go slowly, take lots of pictures ( so you don't get left with parts "over" at the end ) ..oil everything before you try to take it apart..don't force anything. You can probably braze / weld the broken one to fix it*..But $40.00 seems reasonable for a part that seems to be made from unobtanium. * Fix the broken one , buy the other one..if the brazed / welded broken one works, ( don't see why it shouldn't ) keep the other for a spare..or sell it. Edited August 17, 2019 by mikesc Quote Share this post Link to post Share on other sites
LeatherLegion Report post Posted August 18, 2019 (edited) 1 hour ago, mikesc said: Parts list ( pdf ) is herehttps://www.universalsewing.com/tek9.asp?pg=parts_juki You are looking for Model LS-341N or 341N-7 1 hour ago, mikesc said: Take-up arm is out...thank you !!! Edited August 18, 2019 by LeatherLegion Quote Share this post Link to post Share on other sites
LeatherLegion Report post Posted September 23, 2019 Machine is back up and running. Big THANK YOU !!! to #mikesc helping finding the take up arm , and to Dave from Leather Machine Co sending me the small thread tension assembly for free. Thanks again guys !!! Ed Quote Share this post Link to post Share on other sites
