Members Joniboo Posted March 12, 2020 Members Report Posted March 12, 2020 30 minutes ago, Constabulary said: What kind / brand of motor do you have? A JACK servo from CS? They are removable but some have 13mm and some have 15mm shafts - guess how I know. I do not own it yet. I have read om this forum people suggested the JK 563A1 so i asked CS about the shaft diameter/pulley inner diameter and got the response you cant remove the pulley. I guess 13 or 15 does not matter for me. Were the shafts in the motors you got tapered or straight? Quote
Members Constabulary Posted March 12, 2020 Members Report Posted March 12, 2020 Jack servo shafts are straight. Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.