Union Lockstitch needle plate #615

[DavidMillsSaddlery]

Anyone have info?

 

[shoepatcher]

Contact Campbell Bostitch in Texas.   They service and have parts for this machine.  You need a throat plate

glenn

[Wizcrafts]

ULS made various shapes of slide-on throat plates. I used to have custom throat plates made when I had those machines. Yours is obviously a raised and tapered plate, possibly for footwear. The holes for the edge guide are a bonus because the shorty plate doesn't have slots to mount a swing-away edge guide. You should request a copy of the user's threading and parts manual from Campbell-Randall. Parts are still available, but are not cheap.

[DavidMillsSaddlery]

I’ve got a boatload of parts in a trade recently! This was included! I’ve even got the football presser foot! More screws than I’ll ever use! 

9 hours ago, Wizcrafts said:

ULS made various shapes of slide-on throat plates. I used to have custom throat plates made when I had those machines. Yours is obviously a raised and tapered plate, possibly for footwear. The holes for the edge guide are a bonus because the shorty plate doesn't have slots to mount a swing-away edge guide. You should request a copy of the user's threading and parts manual from Campbell-Randall. Parts are still available, but are not cheap.

I’ve got the parts list and user guide! I couldn’t find this 615 anywhere! Messaged Miles at Campbell about this, but haven’t heard back...

[DavidMillsSaddlery]

1 minute ago, turbotexas said:

Only photo small enough! 

[Wizcrafts]

14 hours ago, turbotexas said:

I’ve got a boatload of parts in a trade recently! This was included! I’ve even got the football presser foot! More screws than I’ll ever use!

I might could use a needle clamping screw that goes on the needle bar, among other parts. Do you have that screw in your spare parts? It is square headed.