Members Dufresne Posted February 17, 2020 Members Report Posted February 17, 2020 If the bell crank end is worn with a flat spot on it should it be replaced? Quote
Members Toon1954 Posted February 23, 2020 Members Report Posted February 23, 2020 Op 18-2-2020 om 00:45 zei Dufresne: Als het krukasuiteinde versleten is met een vlakke plek erop, moet het dan worden vervangen? Dufresne, wat bedoel je met de krukasuiteinde! Ik ben nog maar net bezig met deze hobby. Mijn 29 UFA heeft heel kleine steken. Quote
mikesc Posted February 23, 2020 Report Posted February 23, 2020 @Toon1954.. Beter is het om Engels te gebruiken...Het deel wordt door de Constabulary in zijn commentaar ( met foto ) verderop genoemd... Feb 16.. "Maybe not too important but just for the records. I finally have found OEM Singer Bell Crank Levers (both #82167) with different dials." "Misschien niet al te belangrijk, maar alleen voor de records. Ik heb eindelijk OEM Singer Bell Crank Levers (beide #82167) met verschillende wijzerplaten gevonden." Mijn Nederlands is niet goed ... excuseer mijn fouten... weer beter om Engels te gebruiken. Quote "Don't you know that women are the only works of Art" .. ( Don Henley and "some French painter in a field" )
Members pabloteila Posted August 25, 2020 Members Report Posted August 25, 2020 Hi, I'm having trouble with my Singer 29K, I bought it recently. The machine sews but the foot does not advance at all, it stays in place, I have tried to regulate the Bell Crank Levern but it does not vary. I also tried foot pressure. Do you know what could be happening to me? Thank you very much in advance, Paul Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.