Double sided snap fastener (domed both sides)

[JamesBlk]

Hi, 

I've been trying to find a double sided snap fastener, by which I mean domed on both sides, as in the attached picture. I feel like I may be using the wrong words to Google them or something. 

I thought about using a rivet as the second dome but I'm not sure if this would work, and it may not be exactly the same. 

The images attached are from a cable tidy on a very cheap charging cable so I didn't think they would be too hard to find. 

Thanks in advance for any help. 

James

[klutes]

Just use the dome post on each side. That’s what I have been doing.

[JamesBlk]

40 minutes ago, klutes said:

Just use the dome post on each side. That’s what I have been doing.

I should have tried that actually, the ones I have have a different type of post on the two section but I will give it a go. It would still be handy to find somewhere where I can buy a set with two domes so that I'm not wasting loads of bits. I know you can buy some separately but this only seems to be the case with expensive ones. 

 

Thanks

[fredk]

I've only had to cover a base a few times. Each time I just superglued the head of a ready-rivet on. I matched the colour of the head of the snap with the same in the rivet.