rktaylor Report post Posted November 29, 2019 I am planning to build a shotgun case (or 2). I have the pattern pack from Springfield leather, but don't want the full length zipper. I have seen a few cases online that I like better, but no patterns. Am I stuck making my own pattern? Also, I would like to make a case for a bolt action rifle with scope. I have seen plans for scabbards, but not cases. Can I leave the bolt in place inside the case or should it be removed? I am a gun novice. Thanks for any tips. Randy Quote Share this post Link to post Share on other sites
Halitech Report post Posted November 29, 2019 Tandy has their patterns for free. Check this one and see if it is what you want https://www.leathercraftlibrary.com/product/1220/shotgun-case-and-bird-bag-pattern-pak-2691 Quote Share this post Link to post Share on other sites
rktaylor Report post Posted November 30, 2019 (edited) Thanks. I must have missed that in my search. Randy. Edited November 30, 2019 by rktaylor Grammar Quote Share this post Link to post Share on other sites
rktaylor Report post Posted November 30, 2019 The Tandy pattern also has a full length zipper, but I like the bottom plug at the barrel end. Thanks, Randy Quote Share this post Link to post Share on other sites
chuck123wapati Report post Posted December 1, 2019 On 11/29/2019 at 1:08 PM, rktaylor said: Can I leave the bolt in place inside the case or should it be removed? I am a gun novice. Thanks for any tips. Randy Gun laws would dictate that, they are different in all states and there may be some that require it, I would make a pocket for it just in the chance it goes to one of those states or just if the owner wants to carry it removed or even to carry other tools with their rifle. Here in Wyoming it doesn't matter I leave it in to keep the action and bolt clean. Quote Share this post Link to post Share on other sites
