Jump to content

Recommended Posts

  • Members
Posted (edited)

Barber clippers, like Wahl.  Pick the guard you need for the thickness you want.  You may want to do it outside or somewhere with hard floors so you can sweep it up.  Depending on how large the shearling is and how much nap you are cutting off, it could get rather messy.

If this is a one shot deal, try to borrow a pair or get the cheapest you can find.

Edited by Aven
Posted

I agree with Aven. If you know a dog groomer they maybe able to help. I would try a #40 or a #50 blade with a attachable comb sized to the height that you want the length to be. A lot is going to depend on how curly and intermingled it is and how large an area you are trying to cut down evenly. If it is just the edges it shouldn't be too difficult but getting large areas to look good can be a challenge.  

kgg

Juki DNU - 1541S, Juki DU - 1181N, Singer 29K - 71(1949), Chinese Patcher (Tinkers Delight), Warlock TSC-441, Techsew 2750 Pro, Consew DCS-S4 Skiver

Posted

I cut down sheepskin fleece for dye application, so the fibre is not so long and holding (wasting) extra dye. I just use a pair of scissors. The finish is not really flat and even as you would want for a project, but it works OK for my purpose.

Kindest regards

Brian

 

"Whether you think you can or whether you think you can't, you are right"  Henry Ford

Machines: Singer 201p, Kennedy,  Singer 31K20, Singer 66K16 ("boat anchor" condition), Protex TY8B Cylinder Arm (Consew 227r copy), Unbranded Walking Foot (Sailrite LSV-1 copy)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...