Members DanishMan Posted December 7, 2019 Members Report Posted December 7, 2019 Dear Friends I am in the process of replacing the motor of a PFAFF 593. After having qualitiy issues with the supplier of the motors, I used before, I bought two ISM SV-71 motors at College Sewing in the UK. They appear to nice motors, but the one I put on the 593 rattles just before stopping (when releasing the foot pedal). I might have programmed the motor wrong - Any ideas to what the problem might be? Cheers DanishMan Quote
Members Constabulary Posted December 7, 2019 Members Report Posted December 7, 2019 I´d say check with college sewing - they usually respond fast - make a video and send them a link Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Members DanishMan Posted December 7, 2019 Author Members Report Posted December 7, 2019 Hi Constabulary. Good idea - I will do that. Cheers Søren Quote
Hockeymender Posted December 7, 2019 Report Posted December 7, 2019 I don't have an answer to the issue, however I have several ISM SV-71 motors in my shop and experience exactly what you are describing. It seems to come and go, there is no rhyme or reason to it. It would be both interesting and helpful if an explanation could be found. Quote Regards, Joe Esposito www.hockeymenders.com instragram: @hockeymenders.com
Members DanishMan Posted December 8, 2019 Author Members Report Posted December 8, 2019 Thank you Hockeymender I will give College Sewing a call tomorrow. If they come up with a solution, I will post it here. Cheers DanishMan Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.