Rogerds Report post Posted March 26, 2020 I have had a side of 9/10oz skirting (Tandy) in my shop for a couple of years and it has become so tough in parts that my strap cutter just about bounces off it. Has anyone got some idea how to improve this, without changing the properties. I live in the tropics of Queensland ,Australia and the humidity rarely gets below 60% and is really good at turning bits of leather green and furry in summer . Regards Roger Quote Share this post Link to post Share on other sites
DomsLeather Report post Posted March 31, 2020 I had some 12 to 15 oz veg tan I couldn’t click with my manual clicker press. I cased it to see if it would update help and it did. I dampened it like I was going to carve or stamp it and it clicked easier. I am not sure if that’s proper but it worked for me. I let the prices dry overnight stained and finished them the next day. Quote Share this post Link to post Share on other sites
tsunkasapa Report post Posted April 1, 2020 Put some oxalic acid crystal in the water you case it with and it will minimize the chances of mold or mildew. Quote Share this post Link to post Share on other sites
Rogerds Report post Posted April 18, 2020 THANKS FOR THE TIPS ROGER Quote Share this post Link to post Share on other sites
