JJN Posted September 28, 2020 Report Posted September 28, 2020 Does anyone know what the size/pitch is for the bottom mounting screws (bolts) that attach the head to the table? This for an Adler 30-15 but imagine they might be the same for all the Adler 30 series patchers. There are 4 of them of course. Quote
Members Old Coach Saddlery Posted September 29, 2020 Members Report Posted September 29, 2020 (edited) I can check mine tomorrow for you. Edited September 29, 2020 by Old Coach Saddlery Quote
Members shoepatcher Posted September 29, 2020 Members Report Posted September 29, 2020 (edited) they are metric. I am thinking 8 mm standard thread pitch for 8mm. need to be 1"/25mm long glenn Edited September 29, 2020 by shoepatcher Quote
JJN Posted September 29, 2020 Author Report Posted September 29, 2020 Thanks guys, I'll pick some up tomorrow and try them out. Quote
Members shoepatcher Posted September 29, 2020 Members Report Posted September 29, 2020 JJN, Did you ever get a manual for your clicker. I found mine for the Model C glenn Quote
JJN Posted September 29, 2020 Author Report Posted September 29, 2020 Glenn, Yes, you sent me a copy. I need to scan it and put a copy on this forum. Thanks again! Quote
Members Old Coach Saddlery Posted September 30, 2020 Members Report Posted September 30, 2020 8mm x1.25 is the size Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.