Members HayleyMcJenno Posted November 16, 2020 Members Report Posted November 16, 2020 I have a protex ty3300 she is fabulous with layers but as soon as I go from stitching few layers down to maybe one, the foot gets stuck on the ‘ridge’ sometimes it had torn the leather also. It makes the stitches uneven and I have to try pull it out. how can I stop this from happening ? Quote
Moderator Wizcrafts Posted November 16, 2020 Moderator Report Posted November 16, 2020 Are there teeth on the feet? If so, ask your dealers about smooth bottom or knurled feet. Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Members Pintodeluxe Posted November 16, 2020 Members Report Posted November 16, 2020 I have had this happen with standard feet modified to be a zipper foot. There was an abrupt edge towards the back of the foot, and it would often hang up on seams and transitions. Are you using a standard foot or zipper foot? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.