Members AzShooter Posted January 9, 2021 Members Report Posted January 9, 2021 (edited) I had to scrap the other holster, it turned out to be too tight for it's needs so I really measured this one well and once I cut it I placed the gun in to make sure it's going to fit. The large cutout in the center is because of the electronic sight being used. I'll post with gun when complete. e I did the initial stamp with a Tandy Stamp. The basket weave stamps are from Weaver Leather. It's dyed with Saddle Tan, then Antiquing and then a coat or Resolene. The right side is high because for the type of shooting it's used for the trigger guard must be covered. The left is short because of an adapter on the gun and to prevent hitting the magazine release. Any criticism is welcome. Edited January 9, 2021 by AzShooter Quote
Members AzShooter Posted January 14, 2021 Author Members Report Posted January 14, 2021 Finally completed with gun inserted. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.