Members cobblerman Posted January 9, 2021 Members Report Posted January 9, 2021 I have a brand new 1541S and was setting it up watching a video a (very helpful) I have no tension on my spring feed. I went ahead an finished setting it up. It sews fine but the bottom stitch looks odd. I am an experienced sewer with several leather machines. I don't want to mess with it until I hear from someone familiar with this machine, thank you . Quote
kgg Posted January 9, 2021 Report Posted January 9, 2021 I do have a Juki DNU-1541S and am not quite sure what you are calling a "spring feed". A few photos of your spring feed and complete thread path would be very helpful in getting the problem sorted out. Also what size of thread and needle are you using. kgg Quote Juki DNU - 1541S, Juki DU - 1181N, Singer 29K - 71(1949), Chinese Patcher (Tinkers Delight), Warlock TSC-441, Techsew 2750 Pro, Consew DCS-S4 Skiver
Members Tulsa Posted January 24, 2021 Members Report Posted January 24, 2021 Assuming you are referring to the thread take up spring, I’ve attached a photo that shows adjustment. This is from the 1541S owners manual that came with my machine, Hope it helps. Tulsa Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.