Dan Wesson 715 6" barrel mold

[chiefjason]

OK, I found this mold a while back.  Put it up as a listing on my etsy page.  Just sold a holster for it.  Now I'm at a loss for where I found it.  So I'm coming here to see if anyone has seen one.  Called Boise Foundry and no luck.  And that's where I thought it was.  Checked Holstersmith and Bluegunstore.  No luck.  My email to Duncan's bounced back as undeliverable.  

Next option, seems this is close in size to a Colt Python.  Any experience with that?  It's not a tightly molded holster so close should work.  But it does have a security strap so it needs to be real close.  

[Brooks125]

I've made a few for Dan Wesson, but I always need the gun.  The front cylinder release is unique.  If it's a loose design, the Python "Large Magnum" from Bunkhouse may work also, but I'd look up the cylinder diameter before you do.

[chiefjason]

On 2/2/2021 at 8:45 PM, Brooks125 said:

I've made a few for Dan Wesson, but I always need the gun.  The front cylinder release is unique.  If it's a loose design, the Python "Large Magnum" from Bunkhouse may work also, but I'd look up the cylinder diameter before you do.

I'm going with the Colt Python.  Cylinder is just a hair wider than the 715.  I do no molding on the release side of the cylinder.  It's kind of a western style holster with a strap, so no real friction retention at play.  But I removed the listing until I can verify this works.