Members chrisash Posted June 16, 2021 Members Report Posted June 16, 2021 Hi Folks Looking for two things on my singer 111G155 first a swing up guide and second a binder Photo shows holes already on machine wondering if any can be used for the above as I don't really feel confident drilling more holes, No idea of any of these holes are threaded or not, welcome all suggestionsand if possible links to items that may fit Quote Mi omputer is ot ood at speeling , it's not me
Members chrisash Posted June 16, 2021 Author Members Report Posted June 16, 2021 back of head Side view Quote Mi omputer is ot ood at speeling , it's not me
Members LindanHotAir Posted June 17, 2021 Members Report Posted June 17, 2021 You can buy extra slide plates and drill and tap them as needed. The 2 holes in the casting may be tapped. Make sure the screws don’t protrude below the plate. Quote
Members Constabulary Posted June 18, 2021 Members Report Posted June 18, 2021 Both topics have been covered several times. Maybe a google forum search will get you some pictures or more information. Really, we talked about it several times already. Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.