Members chrisash Posted June 16, 2021 Members Report Posted June 16, 2021 Hi Folks Looking for two things on my singer 111G155 first a swing up guide and second a binder Photo shows holes already on machine wondering if any can be used for the above as I don't really feel confident drilling more holes, No idea of any of these holes are threaded or not, welcome all suggestionsand if possible links to items that may fit Quote
Members chrisash Posted June 16, 2021 Author Members Report Posted June 16, 2021 back of head Side view Quote
Members LindanHotAir Posted June 17, 2021 Members Report Posted June 17, 2021 You can buy extra slide plates and drill and tap them as needed. The 2 holes in the casting may be tapped. Make sure the screws don’t protrude below the plate. Quote
Members Constabulary Posted June 18, 2021 Members Report Posted June 18, 2021 Both topics have been covered several times. Maybe a google forum search will get you some pictures or more information. Really, we talked about it several times already. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.