Rossr Posted October 15, 2021 Report Posted October 15, 2021 So here is a large embossing roller. Wondering what machine does it fit. Outside 3 inches, inside hole is 1-5/8 inches width 1-5/16 inches. I've never seen one but maybe for the randall embossed R-32? Good paperweight :) Quote
Members Handstitched Posted October 20, 2021 Members Report Posted October 20, 2021 I can identify the pattern, I've seen that pattern on police , security belts etc. Not so sure about the machine tho . HS Quote
Rossr Posted October 20, 2021 Author Report Posted October 20, 2021 6 minutes ago, Handstitched said: I can identify the pattern, I've seen that pattern on police , security belts etc. Not so sure about the machine tho . HS I gather these folks did some police stuff so that makes sense. Trying to figure out value if any for it. Quote
Members Cumberland Highpower Posted October 20, 2021 Members Report Posted October 20, 2021 (edited) I've got a R-32 embosser and it looks like a roller for it. There were other makes of embossers too that used similar size rollers. I don't have that exact pattern, but I do have a standard basketweave roller and 2 very slim rollers with that scalloped pattern identical to yours that you stack on either side of the basketweave. Adds up to be very very similar to your roller. I rarely use the R-32. Right now it's supporting a stack of Bridle bellies about 2 feet deep. There is one for sale on this forum. If you buy it, you already have a roller for it. Edited October 20, 2021 by Cumberland Highpower Quote
Rossr Posted October 20, 2021 Author Report Posted October 20, 2021 1 minute ago, Cumberland Highpower said: I've got a R-32 embosser and it looks like a roller for it. There were other makes of embossers too that used similar size rollers. I don't have that exact pattern, but I do have a standard basketweave roller and 2 very slim rollers with that scalloped pattern identical to yours that you stack on either side of the basketweave. Adds up to be very very similar to your roller. I rarely use the R-32. Right now it's supporting a stack of Bridle bellies about 2 feet deep. Sounds much like my rossley folding table that at anytime holds measuring tools , misc pens and pencils, my eood carving tool bag etc etc .....I now have a second folding table so I need to see if I can sell one off cause shop space is at a premium and don't need another catch all ! Quote
Members DavidJTaylor Posted December 18, 2021 Members Report Posted December 18, 2021 I have a machine that uses that size. Can't find a name on it. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.