Jump to content
wildrose

Latest rose

Recommended Posts

My 3 yr old SON wanted purple, so purple it is....I think if he'd said pink, my husband would've put his foot down on that... :thumbsdown: not that I would've cared...I painted his room yellow 'cuz he wanted it that way...

009.JPG

010.JPG

011.JPG

ps if anyone wants the pattern, I still have it. I can't post it publicly (it's by Tandy) but will email it to you.

post-5639-1213319129_thumb.jpg

post-5639-1213319137_thumb.jpg

post-5639-1213319145_thumb.jpg

Share this post


Link to post
Share on other sites

Those are beautiful! The purple looks almost iridescent... what kind of dye did you use?

Kate

Share this post


Link to post
Share on other sites

A rose by any other name......

I made one or two... but neither turned out as nice as yours..... What do you use for the center piece to pull the leather down onto the wire through the holes? I used beads, but the colors stick out and attract away from the rose....

Share this post


Link to post
Share on other sites

WOW!

The color and detail are Great.

Johnny

Share this post


Link to post
Share on other sites

Beautiful flower. Tandy has a free handout re a similar rose, but yours is wayyyy better. By the way there's nothing wrong with the color. My wife raises nearly black irises. Stan

Share this post


Link to post
Share on other sites

Actually, mine are made using that very Tandy handout...I'm flattered by the compliment :) It was alot of trial and error.

I use leather anywhere from 4/5 to 6/7, lighter is easier of course. I'd like to try them smaller some time - my best friend used to do little ones as pins. I've used both dyes (Fiebings) and acrylics on them. This one is a metallic purple (FolkArt) I bought at Michael's craft store. I'm pretty cheap when it comes to stuff like this - the less expensive materials, the better. Roses are a good use of scrap leather! The bead in the center is a clear pony bead I also got in a 100-ct bag at Michael's. I find the clear ones can be a challenge to get, but they work best in all color roses. I bend the stem down over the bead with needle nose pliers. I'll take some more pics and post 'em...

Share this post


Link to post
Share on other sites

001.JPG 002.JPG

003.JPG 004.JPG

005.JPG 006.JPG

008.JPG 009.JPG

Here are some pictures of a rose in various stages. Sorry some are fuzzy, was trying for some shots of the bead part.

Here's how I did it:

1. trace and cut each piece. Punch hole in center.

2. dunk a piece in water, remove immediately, shape to desired form. At this stage, what I've taken to doing is to assemble the rose and place it down inside a paper/plastic cup to dry.

3. dye or paint with acrylics (I think the acrylics leave it with a better/leathery smell).

4. using needle nose pliers, bend the tip of the wire around a bead

5. put the pieces on, smallest (bud) to biggest petal piece. Finish with leaf piece.

6. put another bead up the "stem". Wrap the stem with florist tape to keep everything in place at the top.

The way the instructions call for to assemble them --- well, I've not been able to get it to work. And neither did my 4H group, I should add. So I just do them this way and they look just fine to me!

post-5639-1213366723_thumb.jpg

post-5639-1213366731_thumb.jpg

post-5639-1213366741_thumb.jpg

post-5639-1213366749_thumb.jpg

post-5639-1213366768_thumb.jpg

post-5639-1213366787_thumb.jpg

post-5639-1213366808_thumb.jpg

post-5639-1213366842_thumb.jpg

Share this post


Link to post
Share on other sites
001.JPG 002.JPG

003.JPG 004.JPG

005.JPG 006.JPG

008.JPG 009.JPG

Here are some pictures of a rose in various stages. Sorry some are fuzzy, was trying for some shots of the bead part.

Here's how I did it:

1. trace and cut each piece. Punch hole in center.

2. dunk a piece in water, remove immediately, shape to desired form. At this stage, what I've taken to doing is to assemble the rose and place it down inside a paper/plastic cup to dry.

3. dye or paint with acrylics (I think the acrylics leave it with a better/leathery smell).

4. using needle nose pliers, bend the tip of the wire around a bead

5. put the pieces on, smallest (bud) to biggest petal piece. Finish with leaf piece.

6. put another bead up the "stem". Wrap the stem with florist tape to keep everything in place at the top.

Beautiful roses.... i must give them a try for my partner.

The way the instructions call for to assemble them --- well, I've not been able to get it to work. And neither did my 4H group, I should add. So I just do them this way and they look just fine to me!

Share this post


Link to post
Share on other sites

Those are so cool.. thanks for the how to and pictures :specool:

Share this post


Link to post
Share on other sites

I'd agree with your hubby but this is real pretty. Don't tell mywife I said that word.... :deadsubject:

Share this post


Link to post
Share on other sites

LOL Spider! I'm wondering if the love of purple can be genetic: my mom-in-law, mother, sister, niece, and now Ethan are all nuts about it. On the other hand, my dad, nephew, and I are all crazy for orange. What causes a color preference after all?

And thanks to all for the compliments.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...