I'm curious about some books from films that I've seen, and would like to craft both on the inside and out. The list I have right now includes:
The Red Book of Westmarch from The Lord of the Rings
The Shepard's Journal from Atlantis: The Lost Empire
Journals 1-3 from Gravity Falls
I can find photos and reference for the exterior of the books easily, and I am working on blank versions of these, but its the interiors of the books that's a bit more tricky. All of these books ar
Heh all,
I apologize if this is not in the appropriate spot on your site.
I am trying to get a handle on a ball park value for a used Mitsubishi LU2-400 machine with table.
It has seen a few miles and has not been used for a couple of years.
My dad bought it used a number of years ago and used it for a re-upholstery hobby he had.
He has since passed away and we would like have an idea of value. I know that it is completely dependent on the condition of the machine.
I am just looking for a
Hello Everybody,
I have a Korrect leather measuring machine that needs a little work.
It was in perfect working condition until I decided to ship it to my factory.
Needless to say I wold appreciate if anyone could lead me to where I can find manual.
Any help would be appreciated as I do want to continue using it.
Thanks!
I am selling the dies and equipment from my motorcycle leather company, Gypsy Leather. Men's and Women's jackets, vests and chaps. All original steel rule dies. I have 2 Herman Schwabe Clickers, 2 Juki LU-563 Industrial machines with computerized motors, 1 Rex, 1 Singer with rolling foot and computerized motor. If anyone is interested let me know and I will send pictures and prices.
Need help finding manual or info on this machine. I think its older but I bought it a month ago brand new, never oiled, no manual. Need manual for operation and oiling needs. Any help would be appreciated.
I have been asked about a gun holster that looks like a cell phone case. I found something on line called a "sneaky pete". Does anybody know whether this holster falls into the same catagory as the wallet holster. I read an article in the Leather Crafters Journal basically saying for leather crafters to stay away from making gun wallet holsters.
Shoemakers in Connecticut here, inquiring about clicker dies. We just purchased a USMC Model "C" clicker press and are eager to work it into our shoemaking process. Has anyone here had experience making clicker dies? Ordering clicker dies? I was looking at Swanson in New Hampshire as a possible die maker ... Is one die better than another? Is one die maker better/cheaper than another? Should I keep using shears until I can't keep up with my orders? Seriously though, I would love to hear
I am searching for information about a saddle maker...Jeff Kask. He was from Santa Fe, New Mexico, and I was told he made saddles for several Hollywood movie stars including Robert Duval, Kurt Russell and Tommy Lee Jones as well as making the saddles used in the movie Tombstone. Any information and insight would be greatly appreciated.
I have this H H Heiser Saddle according to the makers mark it was made 1880s- 1920s.
I would like to get any history I can and also a value.
Any information would be appreciated!
I've been researching machines, trying to decide. I've looked at Cobra, Techsew, and Cowboy. I make large panniers and packsaddle riggings. I also make chaps, saddle bags, etc. These machines, i think are all made at the same factory. Is there really one above the other, if so why. Or is there another machine i should look at?
Thank you for your help in advance.
Hi folks,
Please forgive any errors I may make as this is my first attempt being a new member. I have always appreciated high quality leather goods but never thought that I could one day make any, it's great to have found this venue. My question: Are there any Leatherworkers around Nottingham, UK who could help/ advise me please?
Thanks & I'm excited at becoming a leatherworker.
John aka 'Woodentop'
Hi, I can't find any shell cordovan anywhere. Horween is backlogged, and I've tried all the other sites I have seen on here, but no luck. Can anyone help me? Thanks
Hello, strange new community of artisans and hobbyists!
I've been brought to your community through some hours of searching for profitable crafting ventures to embark upon with my leftover materials from a recent renaissance faire costume. Of course, being the purist that I am (perhaps a bit of a perfectionist as well), I just had to make sure that the armor for my costume was actually armor, and not... well, a costume; this has left me with quite the expensive pile of 9oz tooling leather, pigs
Greeting one an all, Found this site while looking for information relating to un-jamming my Tacsew T1563 machine. Looks like I found a group of like mined leather folks. I have managed unlocking it before -but it is stubborn as all get out this time. Had the machine for at least 10 years and like it a lot - albeit it tempermental - quits at 5 PM - Did it again last evening and now I can't get the old girl up and running. Repair person scheduled for tomorrow AM - Hope I can cancel the exp
Hello All! I am new to braiding and I am trying to braid round plait dog collars and leashes. I could use some help though. I am having difficulty with back braiding and creating a loop for a leash. Can someone with a little experience please help?
Hi! I am new to this site and created this blog to create conversations about how I can get started designing leather handbags. I know absolutely nothing about getting the bags manufactured or finding a leather professional to aid in the design process. I'm not even sure this is the correct site to go about this, but I have to start somewhere! Basically to sum it all up I'm an aspiring leather handbag designer and I am trying to decide which route would be the best route to take when looking for
Hi.
I experienced saddler living in Ireland. I mostly repair tack but I am able to make up and hand stitch headcollers, bridles, reins etc. I cannot make saddles but can repair and reflock them. My dad was a saddler as was my uncle so ive grown up around it..
I am looking for full time work in any country or advise on the best websites to search.
Thanks for reading this and helping if you can.
So I stripped and dyed my tan western leather saddle black with fiebings dye and it looked really nice, and all the parts were covered. There were a few places that just didn't want to dye, but they eventually did. I let it dry for 24 hours. Then I started to apply the acrylic resolene (also fiebings) and it took some of the black dye off, exposing the tan color underneath. I think the spots that changed back to tan were the places that were hard to dye. Does anyone know what I did wrong? Did I
Hi,
i am leather technitian from bangladesh.i want to export leather.is anyone here who wants to buy leather?please contact with me.
my e-mail:pijushroy1000@gmail.com
thanks
