firetoad

Thanks again! And yes, those boots are some well used, working boots for sure! I just finished up another pair for my wife and yes, her boots need just as much TLC as my boots do.

Thanks for the compliments guys. The pulling collar pattern is actually my own pattern. I built it specifically to fit our cow horses, 14 to 14-3 hands. I may change out the browband on this one because I am not sure about the fit on this little-headed guy.

Some of my latest work... I used a Cow Camp Saddlery Two-Buckle Headstall Pattern, that I modified to fit my shorty sorting/cutting horse, to make the following. I also made it to match the crazy legs stamped saddle I regularly ride and pulling collar that I recently made. It is all HO Chestnut English Bridle 8/10 oz. Leather.

Just a final example of what you can do with HO English Bridle Leather...

I have seen a few threads on the site here regarding stamping and tooling Hermann Oak English Bridle Leather. But, I was not able to find a definitive example/sample that said "It will work". So, let me share my story... After some issue with a side of Tandy Harness Leather (which I love to make reins out of), I ordered a side of Hermann Oak English Bridle Leather. The HO leather was going to be used to make a pulling collar for a saddle. But, I needed to stamp it so that it would match my saddle stamping. I cut some blanks from the bridle leather side and away to the sink I went. After saturating the leather, letting it dry some, and putting it in a large ziplock bag in our warmest bedroom overnight, I pulled them out and away I went. After I was finished stamping, I gave the piece time to dry overnight and put some Walsh darkening oil to it. I have attached a photo for everyone's future reference of the finished product so that future leatherworkers can have an idea of what tooled HO English Bridle Leather looks like.

Thanks for the compliments everyone!

Thanks Tom! You are correct on the boots, LOL! They sure have seen alot of saddle time!

Well, I felt the need to make something and that something turned out to be some new spur straps for me. In particular, I decided to make myself a nicer pair of stamped dovewings with an antiqued berry concho. After six days, my straps are finally complete. I am pretty pleased with them! Check them out...

Thanks for the compliment! They are stuffed, and I mean STUFFED, with poly fill like you buy at the fabric store. I wanted some give and rigidity at the same time. The chap leather is flesh side out for a roughout on the rolls themselves. Better grippy, grippy. I attached the center-pointed D-ring end of the rolls to the underside of the pommel with a latigo strap that I cut. I attached a couple additional pictures so the you can see the method of attachment.

Well, another first for me. I just completed my first set of bucking rolls and they are now installed on my saddle. Pretty simple to construct, but I still need practice with my sewing machine! ;-)

Very very nice! I like the work!

Thank you very much for the compliments everyone! They are much appreciated!

Thank you for the compliment!

So, we picked up a used, but never actually used, SRS Wade Saddle. I fell in love with this saddle instantly. But, it didn't have a matching breast collar. So, I decided to make one to match, or at least as close as I could. So, some Herman Oak Old World Russet Harness Leather, some SS and NP hardware, some cutting, some handstitching, some barbed wire stamping, some oil rubbing and edge rubbing later, this is what came out of it... And no posting is complete without an action shot...

Sorry, I should have been more clear (or maybe I am being too dense now, sorry if I am). I actually didn't braid the mecates. I just did the end splices and added the poppers. They were made out of Samson 1/2" EQ Braid, double-braided polyester, rope. The value of the rope is great, price per foot vs. quality. I like the feel of New England Rope's 1/2" double-braid, but it is more than twice the price!

I have done some slobber straps before along with holsters, knife sheaths, straps and the like. But, I have never gotten into doing any stamping on my projects. So, all in I went! My first stamping project and latest set of slobber straps for your viewing pleasure and/or critique... The dye went a little darker than I wanted, but it turned out usable for me. BTW, I also made the set of mecates that are pictured (I tie my own halters, lead ropes and mecates too).

Very nice work!

Thank you everyone for the great compliments! It definitely makes me feel good about it. Here is a little more detail of the opening/front of the holster: I have to admit that the finer details of the holster leave a little to be desired, but, as my FIL says, you will never notice riding by on a fast moving horse. Things such as the backside stitching, the smoothness of the edge along the length of the suppressor made of 3 layers for a spacer, the placement of some of the stitching and a few other details do show some inexperience on my part. EricDobson, As far as the weight of the leather, I honestly have no clue. I told the guy at the local Tandy store that I wanted to make a holster that could withstand some abuse. He made a few recommendations to me and I just picked this piece of leather based on the overall look of the piece. He told me what their code was for leather weights, but I can't remember what he told me. The code on the leather was 99606-12 and it measures about .112" along the cut edge. Also, I did double up the leather in numerous places, and, as I just stated above, the spacer used at the suppressor/barrel end of the holster was 3 thicknesses of leather alone with a single piece along the entire interior circumference of the open bottom of the holster.

I am new to the forum and actually new to leatherworking. I got my start by looking around and not finding what I wanted. I was looking for a holster for a suppressed .22lr pistol that I had recently acquired. I wasn't sure exactly what I wanted and then I saw the movie Zombieland. The mare's leg holster that Tallahassee (Woody's character) wore pointed me in the direction that I wanted to go: drop leg with leg tie, open top and LEATHER. So, I stumbled across this forum and read some posts (thank you to all for the vast and wonderful knowledge and information shared on this site), took a trip to a local Tandy store and started making my holster. The design as well as all of the work is solely mine. It isn't the sexiest, the dye is a little blotchy (which I was actually intending) and it won't win any tactical handgun matches, but it is mine and I am proud of it. So, without any more blathering from me, here is my first project...