Still having same problem please help

[Still having same problem please help]

You can see the spot on the needle where it is hitting. Is it supposed to do that?

[Still having same problem please help]

It is contacting the needle looks like hitting right at the top of the thread hole in the needle. Gonna take needle out to compare but looks like has actually nicked a spot on the needle. 

[Still having same problem please help]

Im not sure exactly what angle or position to show but ill start with these. 

[Still having same problem please help]

If the tornados don’t get me I’ll post more pics after lunch. Don’t have time to move machine to basement. Lol

[Still having same problem please help]

Im trying to learn the parts and different types of feet but I dont have enough knowledge yet to identify the different feet yet. 

[Still having same problem please help]

[Still having same problem please help]

This is the label on the light color thread and the needle. Ill get more pics of foot. 

[Still having same problem please help]

Long groove is on left side and thread is from left to right. 

[Still having same problem please help]

I will double double check but I’m almost certain the needle is in as described and thread is left to right but I will check again

[Still having same problem please help]

Ok im wondering if should have just stayed on original thread so the progress or lack off could be tracked but. 

 

Back to leather set up. 138 on top 92 on bobbin. Size 23 needle. 

Stitches all janked up and it.looks like the thread is unraveling at the needle. 

 

Im very frustrated and things just arnt getting better. 

Issue with thread unraveling at needle

[Still having same problem please help]

 

Thanks to everyone who took time to reply

[Still having same problem please help]

Yes the brown is the bottom or underside on this piece. 
 

thank you 

[Walking foot machine different feet]

Thanks very much. 

[Still having same problem please help]

Seiko stw8/consew 225 that my prior questions have been about. 

I decided to try different materials thread and needle. While I wait on 135x16 size 24 and 25 to arrive.  

So I have size 92 bonded nylon thread with 135x17 size 18 needle and 4 layers of canvas. 

Same issue Im having on leather. The bottom is really loose and not pulling into the material. 

 

Additional pic

[What you wish you had known when you were getting started]

For those who have been at it for a while. What kind of tips or advice do you wish you had known or gotten when you were first getting started??

[Seiko stw 8 / consew 225 what to adjust?]

I’m having trouble finding 24 or 25 in the 135x16 any ideas? I remember seeing a post here I think Bob said he has them but I don’t see on website. I’ll give him a call. 

[Walking foot machine different feet]

My Seiko stw 8 / consew 225 came with the 2 toe foot. Do I need to get additional feet with 1 either left or right toe and what are the different applications for a 1 toe foot vs the 2 toe?

[Does direction of thread twist matter?]

Thank you very much. BTW got the servo motor really quickly thank you. Makes a huge difference. 
 

chris malcom

[Does direction of thread twist matter?]

Ive noticed a few times that the thread on the bottom of my work seems to be "unraveled" or "untwisted" sorry Im just learning the terms but if you held the thread in your fingers and twisted it backwards is what I mean. That made me wonder whether the direction of the thread twist matters as to how I thread the machine and or the bobbin? 

[Seiko stw 8 / consew 225 what to adjust?]

About 6 layers of canvas. 138 thread and 22 needle. I just wanted to test on somthing different from the pieces of leather ive been testing on. 

Would it help to have a size smaller thread on bottom? Ive seen that mentioned here but thought top and bottom needed to be same. Didnt realize that they could be different sizes at same time. Im learning. 

[Seiko stw 8 / consew 225 what to adjust?]

Im still not getting good results on the bottom or back side. The bobbin tension is where I have to jiggle it while holding thread to get it to come out. Ive adjusted and un adjusted the top tension but the bottom still looks sloppy and the knot is not pulling up. 

What do I do next?

Thank you to everyone who took time to reply with help and advice. 

[Seiko stw 8 / consew 225 what to adjust?]

I feel like I am making progress even if slow progress. Today I got my new servo motor from Toledo.  Very helpful on phone and order got here super fast. Got it installed and works great. Also got a new spring (the u shaped one) got that installed and gave it a trial run. Much better. Cant even describe how much easier to control with the servo motor. Wow!. 

 

Bottom or back side still not exactly right but definitely getting there. 

Thank you to everyone who took time to reply with help and advice. 

[Seiko stw 8 / consew 225 what to adjust?]

I’m embarrassed to say I don’t know how to remove the bobbin case. I took out the bobbin but couldn’t see how to remove the case and didn’t see on YouTube how to remove it. 

[Seiko stw 8 / consew 225 what to adjust?]

Ok added upper thread tension and tried 2 layers. I did not adjust stitch length at all but the stitches are much shorter on the 2 layers? Why is that? 
 

on left is 1 layer on right is 2 layers.
 

also looks like bottom or back side getting worse not better. 

[Seiko stw 8 / consew 225 what to adjust?]

Same stw 8 that I have been asking about. Ordered 138 thread and 135 x 16 size 22 needle. I have also changed the motor pulley to a 2”. I have ordered servo motor from Toledo. So test drive with new thread and needle. Only 1 layer for test but the back side or bottom doesn’t look right. What do I need to adjust and how do I adjust it? I had to downsize the pics to be able to upload as per attachment requirements. 
 

any help greatly appreciated.