Sturmtrupp702

I'm looking for a template for a 96 dyna tank bib I'm looking for the style thats the width of the cluster and stops at the bottom of the cluster the link is a picture of the style I want ty in advance https://www.google.com/imgres?imgurl=https%3A%2F%2Fi.ebayimg.com%2Fimages%2Fg%2F5ZgAAOSw6S5dQk~P%2Fs-l400.jpg&imgrefurl=https%3A%2F%2Fwww.ebay.com%2Fitm%2F333547174302&tbnid=MFPkXjl1n-NzmM&vet=1&docid=0RrcyRXS2nLDcM&w=400&h=267&hl=en-US&source=sh%2Fx%2Fim

Whats the best leather to use for motorcycle saddle bags? Chrome tanned or veg tan ? If veg tan is the Herman oak water resistant leather a good choice?<

what kind of top coat can i use on suede ?

im getting ready to make a few notepad holders out of 1-2 ounce leather with bag stiffener in the middle and a layer of cordura inside to line it the bag stiffener is less than a millimeter thick and it is stiff will my econosew 2060e8bld be able to stitch through it? Or should I switch to a firm leather to give the notepad case some rigidity?

i do have a econosew 2060 to do wallets once i get it to quit breaking thread and a Chinese patcher to do belts so the cylinder arm will primarily do sheaths and holsters the class 26 definitely sounds like it will do what i need or a class 3 does anyone have feedback on the cobra machines from tandy?

I recently stumbled upon a landis 16 for sale shipping it to Las Vegas would cost me roughly 700 im assuming this is still a pretty good deal? the seller said the peddles might need to be rewelded but im asking for pictures to see whats going on there. i dont think the seller is very knowledgeable about sewing machines but they said it looks like its all there. should I stear clear of it or take a chance and buy it.

as the title says im looking for a cylinder arm machine for doing knife sheaths and holsters and would prefer to get one with the ability to attach the top to make it like a flat bed for sewing wallets. so far the techsew 2750 pro has stood out to me the most ive also looked at the cobra class 3 and 4 my budget is 3000 any input would be greatly appreciated

ive been searching around but the only description i find is for loose leaf binders wich is a place i commonly see tubular rivets. so is that what this setter is for? or what type of rivets is it for?

http://imgur.com/a/MN3D6XF This shows what I'm talking about

I've been making leather wrist cuffs lately and I'm having problems with the straps drying and looking like they're going to crack I'm dying them with feibings pro dye and a dauber usually 2 or 3 coats then as soon as they're dry I'm putting feibings leather lotion on what should I do different

Recently my econosew 2060e8bld had some thread get wrapped around the bobbin case and I didn't notice it till the needle wound up wedged against the edge of the bobbin case and at the time I thought best to get everything unbound by loosening the set screws on it so I could get the needle unbound and get the thread out and now I cant get the needle to not brush against the bobbin case as it comes up any help would be greatly appreciated

I just bought an antique C.S. Osborne draw gauge that needs a new blade. Will the blade for the new 5 1/2" draw guage fit? Its #51-1/2B

Thank you for the input

I have a chance to buy a white rotary for 50$ on table and it works i dont know the exact model i do know it has a knee bar would this machine be capable of doing a few layers of 2oz veg for making wallets

Kiwican i haven't tried hooking it to my vest or a pack and i didn't plan it to be its a cold steel spetsnaz shovel i love it i wanted one for the longest time and one day one of my friends surprised me with it

I built myself a new bench recently my original just wasn't big enough and honestly my new one isn't big enough i wish i would have made it deeper i use pegboard to hold some of my tools and i just picked up a small craftsman 2 drawer box to hold most of my punches and all of my knives and i have 2 shelves above with cheap harbor freight bins to organize all of my scrap and on the left side next to the legs i have a few pull out trays one for my thread one for edge paint and one for a box with all my sandpaper and sanding blocks

Nice work is that a blackhawk? And over the hammer is that a small strip for retention

I like the colors you used i do alot of brown with black edges and stitching myself and I like the button close on it

These are a few of the knife sheaths ive recently made making sheaths os actually what got me started in leather Ill post more pics as soon as I figure out how to resize them