Damas

There is the local album link

I'll do that today, sorry

To All, thank you so much for your help. I asked a manual from Hightex EU and they sent me the attached leaflet (CB7243 is the other name of CB243)... Also, I took pictures and made videos of my machine, I hope it will cover all the pics you asked for, but in case not, I will take some more ! In order to ease overview of the machine, I did an album : https://photos.app.goo.gl/zaPGY3vKViruLiBZ9 7243.pdf

I'll do that tomorrow, the day is over on this side of the Atlantic and I am no longer at the workshop

@AlZilla It's in the post below the one you mention that I am wondering if it's bent or not (post is still visible on previous page). I cheched it and can not decide if it's bent or not... It's hard to tell when you have nothing to compare to so I ordered a new one but won't get it before two weeks Meanwhile, I put a 230/26 needle in the machine (I normally use 160/23), as asked in engineer's manual and needle was rubbing on the shuttle point so I set "needle to shuttle clearance" accordingly, it's not rubbing anymore I am now trying to set up "needle to shuttle driver clearance" but I am confused trying to understand what I have to look at. Is it the part of the shuttle circled in red in my pic ?