1hp

my mother once put a needle through her thumb nail. very gnarly. i always wear safety glasses while using a machine. never know where broken needles might go.

this guy makes some excellent parts: https://heprecision.com/shop/ols/products?page=1

better to get your last machine first.

these are oil wicks for Consew 206: https://parts.jacksew.com/oil-wick-consew-18110/?searchid=227348&search_query=18110

on my 206rb5, the reverse lever shaft is on the right side of the head. there is a hole near your bobbin winder in a similar spot.

looks similar to the original motor on my 206rb5. Consew_CS-1001 (1).pdf Motors-Con-Serv1000.pdf

this craft, 2 machine minimum.

on my Cobra 4, they are 11/64-40. got some on ebay.

tig weld with nickel rod. pre-heat & post heat. cool slowly in insulation. we do this alot at work.

if you highlight text & right click, chrome has translate in menu.

Check out Bruce Johnson's web page

$15 a foot at McMaster-Carr.

nice. this is 6061 aluminum.

made loop stick as seen in J.H. Leather video: amazing leatherworking skills on display in her videos! it is 1"x1/2". taper is 8" long. 3/16" to 1/2". cut piece on table saw, tapered on mill & rounded edges on router table with 1/32" radius round ov

@brucejohnson sells bleed knot tool.