Search the Community

Industrial Sewing Machine, Double Needle, Post Type Bed ... 500 US$ Atlas Model AT20T53 Double needle machine with a high post bed. Drop feed operation. Currently set up for 1/2" spacing between rows of stitches. Uses 135X5 or 135X8 needle system - Sizes #14 to #22. Uses size "G" bobbins. Rated for up to V138 top thread, but largest practical is V92. Use V69 bobbin thread. Includes: - Machine head - with forward and reverse - Nice sewing stand with a drawer and wheels - Servo drive motor with controller for easy speed control - Three spool thread stand - Work light - Bobbin winder - Screw driver set - Assorted needles - Spare bobbins - Assortment of feet with center guide, left guide, right guide and no guide - Operator manuals Sews well, just don't have a use for it. Especially good for upholstery work. Can easily be converted to a single needle by just leaving out one needle. The high post makes it particularly useful for sewing inside bags, hats, seat covers, tubes or other 3 dimensional items. Sold by Atlas out of California. Similar to many other double needle post machines from Consew (228R-11-A), Techsew 820, Highland (GC241018), iKonic (KS820), Artisan (5120) and many others. Based on the old Singer 52W19. Located about 30 minutes north of Detroit, Michigan.

So far I've been unable to identify this double needle industrial machine. It says model 208 on the front. The only other markings are an apparent serial # C-680227. It's a needle feed machine, and is brown in color. There is a selector clutch on the left of the head to choose one needle vs. two. Some construction details look similar to older Adler machines. Maybe a clone of another machine? Any thoughts? I'm mostly looking for information regarding what needle class it takes, and to confirm the thread path. Thanks!

Selling a Singer 112w140 (I think) double needle machine. It is in very good shape, bought it from Bob at Toledo Sewing last year. Clutch motor, forward only lockstitch. Asking $600. Must pick up in Columbus, OH.

For sale: One Juki LU-1560n double needle, compound feed walking foot machine with table and 600w servo motor. I recently obtained this in a factory sale but I am quickly realizing I don't have the space for a dedicated two-needle machine. This machine is in excellent clean condition, (doesn't seem like it was in service very long) with only the basic signs of use (some typical scratches here and there on the machine bed, belt guard, etc). I've tested it with 69, 92 and 138 bonded nylon and it sews great and climbs over most anything that will squeeze under the foot. 16 layers of ballistic nylon and it didn't flinch. Only issue with the machine I noticed - the thread tensioner disc for winding the bobbins is missing. I imagine they used pre-wounds in the factory and this was a non-issue. I've ordered a new assembly (genuine Juki part) Specs: http://www.juki.co.jp/industrial_e/download_e/catalog_e/lu1500n.pdf 2- needle, currently 1/4" gauge 0-9mm stitch length 16mm foot lift 135x17/16 needle system up to #24 6.5mm climb Rectangular feed locus Big "U" size bobbins Built-in bobbin winder Auto lubrication with filtration (flows great!) Safety clutch Will come with: Table in "decent" condition. The table seems older than the machine. Has all the expected production environment scratches, etc. There was a electric foot lifter solenoid attached, but no switch or power plug for it available on the basic motor, but I'll include it anyway. 600w basic brush-less servo motor with 50mm pulley Brand new belt Brand new oil filter pad Brand new bottle 700ml Juki Defrix #2 Brand new 4-spool thread stand Brand new magnet LED light Brand new waste oil bottle Spare waste oil bottle Pack of brand new misc needles #16 - #24 Basically add thread and materials and sew. Asking $2000. Would prefer pickup or I can arrange drop off somewhere near the SF bay area. Shipping via LTL freight possible too - I can strap it to a pallet, buyer to pay for freight and extra for lift gate as required.

We purchased this Consew Double Needle Post Machine recently. It was purchased brand new from the manufacturer. We thought it would work for our business, but instead it has sat unused in our art studio. We tried using it once or twice, but discovered that it is most definitely the wrong machine for our needs. It is technically in Like NEW condition, with no signs of wear. We've proactively serviced it to ensure that it is ready for the new owner. This machine would be better suited for a saddle maker or a company specializing in leather/upholstery fabric furniture, please see Full Specs below. This machine comes with the table and a servo motor. We are selling it for a few thousand less than what we paid in hopes it will sell quickly. Willing to accept reasonable offers. We are asking $3800 for this machine, actually selling it for a few thousand dollars less than what we paid in hopes it will sell quickly. Willing to accept reasonable offers only. We are unable to ship, due to its weight and size. Instead we are willing to deliver it anywhere within California for an additional $200. California buyers only. Local pick up is also acceptable. This machine is currently listed on EBAY, but I can pull auction if someone on this forum is interested. FULL SPECIFICATIONS: Model # 369RB-2 Double Needle, 1/4" Gauge- 135x17 Walking Foot Speed, Max (S.P.M)- 2200 Clearance Under Pressure Foot- 11/32" (8.5mm) Stitch Length- 5 s.p.i (5mm) Bed Size- 7"x20 3/8" (177mm x 518mm) APPLICATIONS: For sewing medium to medium heavy-weight fabrics. Leather, canvas, vinyl, synthetics, and various coated and laminated materials Designed for sewing operations which require decorative or functional angular stitching such as collars, pockets, shoe uppers, auto, boat and furniture upholstery, slacks, shirts, etc... Designed for stitching such products as overalls, raincoats, luggage, travelware accessories, bags, umbrella's, awnings, covers, tarpaulins, tents, wearing apparel, outdoor clothing, underwear, etc. General/parallel two-needle stitching with split bar for making even angle turns. Suitable for stitching uneven, hollow, tubular and curved articles FEATURES: Compound feed, walking foot mechanism assures perfect feeding of sewing material Large hooks and bobbin cases with their own thread take-up mechanism assure uniform and perfect stitching with minimum bobbin changes Easy operation of disengage able right and left needle bars by use of finger-touch lever Centra-Lube, semi-automatic lubrication system Oil fed take-up Stitches per minute 2200 Reverse Stitching Various gauge sets available Safety clutch protects the hooks from being damaged

I am lookin for a used double needle walking foot heavy duty machine anyone?? Rino