Search the Community
Showing results for tags 'rotary'.
Found 6 results
-
What is the advantages and disadvantages regarding the use of a machine with oscillating hook compared to a machine with rotary hook? Of cause a lot of other parameters matters too, but I like to focus on this alone. I got some experiences regarding heavy use of household machines, but I am not sure it can be extended to leather sewing machines. I noticed this previous comments regarding jam: I cannot say, that I noticed this. I did not made any direct measurements or comparisons. But this is my impression and I know my experience is limited. 1) The rotating hook can sew with lower bobbin thread tension and therefore less overall thread tensions. This is in order to get the same quality appearance of the stitch on the lower side of the fabric. It seems like you need to crank up the tensions for the oscillating hook machines to make the bobbin thread lay down nicely on fabric. 2) The oscillating hook machines runs easier. It is like the rotating hook machine needs more power to produce each stitch. Therefore it might be, that the wear on thread sewn is somewhat less on the oscillating hook machine. I should like to know your impression of the differences.
-
Looking for Weaver or equivalent hole punch press, and edge finisher burnishing machine.
-
For sale in Continental USA only. The following Rotary Embossing machine is for sale. Please Note: you need to send a PM MESSAGE, leatherworker.net notifies us via email as we do NOT check the postings daily or you can call, number listed below. This is a used Rotary Embosser ( do not know what make or model it is). Please take note that this is a 110v Power machine. This machine is in good condition, machine comes with one embossing roll (see Picture). Adjustable pressure and will accommodate a 5 ¾” wide piece of leather between guides, can modify the guides to take a 6 ½” wide piece. I do not have the manual for this machine but one is not required, simple to use. Comes with machine, motor and table Shipping weight is about 120bs on pallet, I will palletize and pack this machine, you will need to arrange a shipper to pick it up. Asking $1000 Reply through this forum or you may call the shop at 602-two69-zero202. Thanks for looking.
-
For sale in Continental USA only. This is a used Campbell Bosworth Rotary Embosser . Please take note that this is a 110v Power machine. This machine is in good condition, breaks open easily to change top embossing roller, machine does not come with embossing roll. Has heating element control but no heating element (available at Campbell-Randall). Adjustable pressure and will accommodate a 7” wide piece of leather between guides, I do not have the manual for this machine but one is not required, simple to use. Comes with machine, motor and table Shipping weight is about 170bs on pallet, I will palletize and pack this machine, you will need to arrange a shipper to pick it up. Asking $1400 Reply through this forum or you may call the shop at 602-two69-zero202. Thanks for looking.
-
For sale in Continental USA only. This is a used Randall Model R32 Rotary Embosser. Please take note that this is a 110v Power machine. This machine is in excellent condition, breaks open easily to change top embossing roller, machine does come with one basketweave commercial embossing roll (does NOT come with the stainless steel roller that is in the picture). Has heating element control and heating rod, will accommodate a 7 ¾” wide piece of leather between guides, I do have the manual for this machine, simple to use. Standard Features: Quick Change of Embossing Rolls, Ideal for doming and forming, simple width adjustments, adjustable pressure, heat control, standard rolls 3” Diameter, pattern 9 5/8” long, larger diameters available for longer patterns. Comes with machine, motor and table Shipping weight is about 350lbs on pallet, I will palletize and pack this machine, you will need to arrange a shipper to pick it up. Asking $2700 Complete Machine is over $7000 new. Reply through this forum or you may call the shop at 602-two69-zero202. Thanks for looking.
-
For sale in Continental USA only. This is a used Rotary Embosser ( do not know what make or model it is). Please take note that this is a 110v Power machine. This machine is in good condition, machine comes with one embossing roll (see Picture). Adjustable pressure and will accommodate a 5 ¾” wide piece of leather between guides, can modify the guides to take a 6 ½” wide piece. I do not have the manual for this machine but one is not required, simple to use. Comes with machine, motor and table Shipping weight is about 120bs on pallet, I will palletize and pack this machine, you will need to arrange a shipper to pick it up. Asking $1200 Reply through this forum or you may call the shop at 602-two69-zero202. Thanks for looking.
