DanaStanley Report post Posted March 23, 2022 I have ordered a CB3200 and want to get accessories for it. The dealer I got it from seems like a nice guy and all, but $75.00 for a left side presser foot is a lot! So, looking around I found one for $43.00 by a company called Ever Nice (on E-Bay) Has anyone used their presser feet? Are they OK? Am I just being a cheap skate? $30.00 less seems like a lot of money to waste. On the other hand, if it isn't a good fit, or breaks then it would be a waste. Quote Share this post Link to post Share on other sites
Marcremb Report post Posted March 25, 2022 Hello Dana Stanley If it can help you. Look what i did on my machine. I have cut a slot at the other end of the presser foot bar to be able to install any kind of Walking foot Singer feet. I was Also finding the 441 feet very expensive and the second reason is that i do Upholstery for living so i need Upholstery feet like piping feet on the monster machine (441). No one sells piping feet for this model. Please look at my topic that i have Just put on the forum, May be you can Also help me Thanks By the way, evernice on Ebay is a very good company. I often buy parts from them. If their is any thing wrong with the part they ship another one Quote Share this post Link to post Share on other sites
CowboyBob Report post Posted March 25, 2022 On 3/23/2022 at 7:10 PM, DanaStanley said: I have ordered a CB3200 and want to get accessories for it. The dealer I got it from seems like a nice guy and all, but $75.00 for a left side presser foot is a lot! So, looking around I found one for $43.00 by a company called Ever Nice (on E-Bay) Has anyone used their presser feet? Are they OK? Am I just being a cheap skate? $30.00 less seems like a lot of money to waste. On the other hand, if it isn't a good fit, or breaks then it would be a waste. Dana, Yes these feet will work & we can also get these chrome plated steel feet & sell them @ a cheaper price BUT we've found so many leatherworkers often sew moist or wet leather which interacts with the chrome & makes it peel off making the steel rusty.The feet we sell as stated on our website are made of stainless steel which will never rust. Quote Share this post Link to post Share on other sites
Marcremb Report post Posted March 25, 2022 12 hours ago, CowboyBob said: Dana, Yes these feet will work & we can also get these chrome plated steel feet & sell them @ a cheaper price BUT we've found so many leatherworkers often sew moist or wet leather which interacts with the chrome & makes it peel off making the steel rusty.The feet we sell as stated on our website are made of stainless steel which will never rust. Sorry Cowboy Bob. I didn't want to interfer your sales. I Just wanted to help. Wont do it again Quote Share this post Link to post Share on other sites
CowboyBob Report post Posted March 26, 2022 12 hours ago, Marcremb said: Sorry Cowboy Bob. I didn't want to interfer your sales. I Just wanted to help. Wont do it again No,it's OK,that's a good idea using the lower cost feet like that & if it works for you that's great.Oh & always chime in whenever you want this board is all about everyones different ideas & experiences.That's how we learn from others. Quote Share this post Link to post Share on other sites
suzelle Report post Posted March 26, 2022 6 hours ago, CowboyBob said: No,it's OK,that's a good idea using the lower cost feet like that & if it works for you that's great.Oh & always chime in whenever you want this board is all about everyones different ideas & experiences.That's how we learn from others. Great info Cowboy Bob! I am glad you pointed out the differences. I had no clue myself what the reason was for the price differences. Probably most of what I am doing right now (mostly vinyl auto interiors) won't damage the cheap feet I purchased for my Industrials. However, I'm hoping to graduate into a nice cylinder arm machine eventually, mostly for leather work. I would not hesitate to purchase the feet you sell for a sewing cylinder arm machine I buy, old or new. That is if you have the feet I may need. Quote Share this post Link to post Share on other sites
DanaStanley Report post Posted March 26, 2022 Thank You all for chiming in! Thank you bob for the valuable info! If you e-mail me before the machine ships, we can see what else I can afford to order with it! Quote Share this post Link to post Share on other sites
CowboyBob Report post Posted March 27, 2022 15 hours ago, DanaStanley said: Thank You all for chiming in! Thank you bob for the valuable info! If you e-mail me before the machine ships, we can see what else I can afford to order with it! Sure will. Quote Share this post Link to post Share on other sites
