Jump to content
MtlBiker

Dyeing to know what I'm doing wrong

Recommended Posts

1 hour ago, MtlBiker said:

Do you dilute it at all, or does that depend on how strong a color you're looking for?  I also ordered some of their reducer.  Is that just denatured alcohol or something else?

Yes, I dilute to achieve the tone/shade that I want. I have no idea what the actual 'reducer' is, but I have used both denatured and isopropyl  alcohol and have had no issues. I buy 99% isopropyl by the gallon. Last I saw, it was going about $32/gal at my local farm store.

Share this post


Link to post
Share on other sites
15 hours ago, MtlBiker said:

Thank you (again!).  I ordered some dyes from Lonsdale yesterday and they're coming in about a week or so (Canada Post).  Lonsdale's web site says to pour some dye into a dish and  then use it.  Is that what you do?  How about using a sponge with the dye directly from the bottle?  Do you dilute it at all, or does that depend on how strong a color you're looking for?  I also ordered some of their reducer.  Is that just denatured alcohol or something else?

Funny that Lonsdale is shipping the dye via Canada Post and Tandy said that only Purolator would take it, and with a surcharge at that.

If you were making an AirPod Pro case (as per the link I posted) would you dye first, then cut the pieces and stitch, or would you do the dyeing after it's stitched?  And if wet moulding after the stitching, how would you handle that?  My  concerns are shrinkage of the leather and also being able to wet mould after stitching.  I'm thinking of dyeing a larger piece first, then cutting and stitching and then wet moulding.  Does that sound good to you?

Thank you again!

 

 

I think Tandy is full of BS. Methinks they just want to move their Eco-Flo subpar brand over anything else and are willing to self-sabotage some of the merchandise they carry in order to do so: case in point: Fiebing's. As long as it's ground-transported, any carrier can deliver Fiebing's "combustible" Pro dyes. Hare-brained shenanigans from Tandy. :rolleyes2:

 

I'd NOT stitch before dyeing: you'll dye the thread!

Thus, I'd dye, then wet mould, then stitch. Stitching would always be my last step—well, technically, the last step would be the edge finishing, but you get my drift.

Share this post


Link to post
Share on other sites
7 hours ago, Hardrada said:

I think Tandy is full of BS. Methinks they just want to move their Eco-Flo subpar brand over anything else and are willing to self-sabotage some of the merchandise they carry in order to do so: case in point: Fiebing's. As long as it's ground-transported, any carrier can deliver Fiebing's "combustible" Pro dyes. Hare-brained shenanigans from Tandy. :rolleyes2:

 

I'd NOT stitch before dyeing: you'll dye the thread!

Thus, I'd dye, then wet mould, then stitch. Stitching would always be my last step—well, technically, the last step would be the edge finishing, but you get my drift.

I agree with that sentiment.  Since the Fiebing's dyes cannot be ordered via the Tandy website (all show as sold out) I emailed the rep who's often helped me (and given great service).  He replied that he only had 8 colors in stock (6 of them shades of brown believe it or not) and that he'd be glad to prepare the order.  I said I would take one of each of the colors he had and asked him to email me back with a total price including shipping with the surcharge and that I'd call him with a credit card number.  (I'm reluctant to give that via email.)  It's now 4 days later and I'm still waiting for him to give me the price.  I think you're correct that they really don't want to sell Fiebing's products.  Meanwhile I ordered from Lonsdale and the order shipped out on Monday.  Prompt service and easy peasy to deal with.

Okay, thanks for the advice.  I will dye my leather before cutting it out, but I will stitch it before wet moulding it (as per the pattern and video I'm following).  Using the solvent based dye instead of water based, will _probably_ eliminate or minimize the dye affecting the thread.  But in any case, I'll be using the same thread color as my dye, or as near to it as possible.  At least for this project, which is really just for practice.  I've already made 4 AirPod Pro cases, but only own 2 AirPods.  So it's all about the practice... dyeing, cutting, gluing, stitching, wet forming and final finishing.  And with such a small item, there isn't much wasted material.  Perfect practice project.

Cheers!

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...