Rossr Posted April 19, 2022 Report Posted April 19, 2022 Been messing around making some Buck 110 folding knife pancake sheaths. The angled one I carved a feather and the straight one just some stamping. I played a a bit with color on the stamped one. Kind antique but not quite. Anyway open to thoughts as always. Thanks Ross Quote
Members PastorBob Posted April 19, 2022 Members Report Posted April 19, 2022 Those look fantastic! Love the color. Stitching looks on point. When I back stitch at the end of a run, I will pull the first stitching really tight so the back stitch over the top will lay down a bit more and not be as obvious. Make sure to burnish those belt slots too. Quote
Rossr Posted April 19, 2022 Author Report Posted April 19, 2022 15 minutes ago, PastorBob said: Those look fantastic! Love the color. Stitching looks on point. When I back stitch at the end of a run, I will pull the first stitching really tight so the back stitch over the top will lay down a bit more and not be as obvious. Make sure to burnish those belt slots too. Thanks Bob. On the back stitch I always try to do that. I stitched these on a needle awl campbell randall sewing machine and I struggle with back stitching with it. If you go through the same hole you can cut the stitch with the awl. So I try to go close or just next to it. I'm really not sure the best practice there. I also have left the tails and then hand back stitched which results in a better result but adds time . Good point ok burnishing the slots as I did not do that, thinking I can do that with a dowl rod maybe or the pointed end of an antler. I use a deer antler on my bench to burnish at times. Good thoughts and thanks for that! Quote
Rossr Posted April 19, 2022 Author Report Posted April 19, 2022 1 minute ago, kiwican said: These look great ! Thank you sir! Hope things are well on your end of the earth! Quote
Members kiwican Posted April 19, 2022 Members Report Posted April 19, 2022 5 minutes ago, Rossr said: Thank you sir! Hope things are well on your end of the earth! Well the current state of the world is keeping me busy! how are things on your end? I miss the chat room Quote
Rossr Posted April 19, 2022 Author Report Posted April 19, 2022 (edited) 36 minutes ago, kiwican said: Well the current state of the world is keeping me busy! how are things on your end? I miss the chat room Glad you are busy! Same old same old here. Working leather and the occasional knife making and just keeping on...I miss the chat room friends and chat too. Edited April 19, 2022 by Rossr Quote
CFM chuck123wapati Posted April 19, 2022 CFM Report Posted April 19, 2022 (edited) REALLY NICE!! Edited April 19, 2022 by chuck123wapati Quote
Rossr Posted April 19, 2022 Author Report Posted April 19, 2022 1 minute ago, chuck123wapati said: REALLY NICE!! Thanks Chuck Quote
Members riy Posted May 21, 2022 Members Report Posted May 21, 2022 On 4/19/2022 at 5:08 AM, PastorBob said: Make sure to burnish those belt slots too. Hey all, I'm going to try my hand at one of these soon, except for a 112. They came out great @Rossr! Wanted to ask if you all have some tips for burnishing a nice edge together inside those belt slots. I haven't had to burnish a space that tight yet. Thanks in advance. Quote
Members PastorBob Posted May 23, 2022 Members Report Posted May 23, 2022 On 5/21/2022 at 5:06 PM, riy said: Wanted to ask if you all have some tips for burnishing a nice edge together inside those belt slots. I haven't had to burnish a space that tight yet. Rub it down with a little tokonole or Tragacanth Gum. Wrap a piece of canvas around your boning tool and rub away. Alternately, I have several brass punches that I use with or without the canvas. It always gives me good results. Good luck. Quote
Rossr Posted May 23, 2022 Author Report Posted May 23, 2022 I also use the tip of a deer antler seems to help. Along with saddle soap or a bunch of other possible things like gum tragacanth etc etc. Best I can say is try stuff. There's lots of ways and everyone finds a method they like best Quote
Members YinTx Posted June 27, 2022 Members Report Posted June 27, 2022 Really tight work. I like it. YinTx Quote
Rossr Posted June 27, 2022 Author Report Posted June 27, 2022 8 hours ago, YinTx said: Really tight work. I like it. YinTx 1 hour ago, BruceGibson said: Beautiful work! Thanks folks. Quote
Members Silverd Posted June 30, 2022 Members Report Posted June 30, 2022 Agree with everyone that says "Geat job!". Your work looks clean and stamping is very tastefully applied. Silverd Quote
Rossr Posted June 30, 2022 Author Report Posted June 30, 2022 On 6/27/2022 at 9:50 AM, JWheeler331 said: Nice job. Thanks 1 minute ago, Silverd said: Agree with everyone that says "Geat job!". Your work looks clean and stamping is very tastefully applied. Silverd Very Kind. Thanks Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.